Using your Remote Control:

1)      Press “MENU” go to “Advanced Options” and press OK.
2)      Go to “Dish Installation” and press OK.
3)      Enter PIN Code “9 9 4 9”.
4)      On “Dish Installation” menu, go to Network 2.
5)      Use left arrow to select “Other” menu.  Press OK
6)      Check that Satellite Name is PAS 7/10
7)      Go to FREQUENCY (line 6) & press OK. Enter 12722, then press OK
8)      Check that the Symbol Rate is 26652.
9)      Go to “FEC” and use right arrow to change to ½.
10)   If the Polarity is “Vertical”, do not change it.
11)   Go to “Use NIT”, and change it to NO.
12)   Go to  “Accept displayed values…”, and press OK
13)  Dish Installation menu should display
14)   Go to “Scan all networks”.   Press OK.   Scanning may take several minutes.  Wait till new screen displays.
15)  Press “TV” button and move down to “Public PAS 7/10” and press “OK”.
16)  Press P+ or P- until you find “Hope”.
17)  To return to DSTV, press “TV” button and select DSTV.

adapted from the hopechannel.tv website